FREE Shipping - order $999 or more!

Floor Care Trouble Shooting


FINISH IS TOO STICKY OR TACKY
CAUSE
SOLUTION
Not enough dry time between coats.
Under normal conditions, finishes dry in 30-45 High humidity will extend these dry times.
 
Restorer not properly diluted or applied too frequently.
Follow label instructions. Overuse can leave .sticky residue.
 
Restorer/maintainer not burnished soon enough after application
When dry, restorer/maintainer will continue to soften finish if not burnished.
 
Floor not properly rinsed before application of finish.
Thoroughly rinse and neutralize floor after stripping. Use neutral cleaner in proper dilution.
 
Improper use of disinfectants.
Measure carefully and follow label directions.
 
Separation of finish
Finish may have been exposed to prolonged heat or cold. Shake or stir before using.
 
Alkaline or detergent contaminated tile.
Make sure to rinse floor until pick-up water remains clear. When recoating, make sure no cleaner residue remains on floor - rinse with clean water to prevent problems.
 
Finish is applied too thick.
Apply thin coats and allow each coat to dry before applying the next coat.
 
FINISH SWIRLS OR SCRATCHES
CAUSE
SOLUTION
Pad too aggressive
Use the recommended pad for a particular task, whether it be burnishing or cleaning.
 
Pad is dirty or has build-up.
Clean with a wire brush or put pad in deep sink and spray off the build-up. Hang up to dry.
Order Online 24 Hours a Day,
7 Days a Week, 365 Days a Year
1.800.998.3295
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
CleanItSupply.com BBB Business Review